Boat Propellers
We stock many lines of boat propellers at LOW PRICES from most of the top manufacturers. We give you the choice between high-performance grade aluminum and stainless steel props to meet your specific needs.
All Turning Point propellers we stock are manufactured with the highest marine-grade aluminum or stainless steel for optimum strength and corrosion resistance. Each propeller is inspected, balanced and detailed by hand, then finished with an exclusive PointGuard or PowerGuard finish. And of course, all propellers are warranted for a full 12 months.
All of the propellers you see here are equipped with the unique, interchangeable MasterGuard Hub System. This system allows you to quickly and easily change out the housing and propeller and replace it with one of a different diameter and/or pitch. This makes it easy to utilize just the prop you need for the conditions you face—and to do
it at a fraction of the cost of other systems.
Click here for more information on the MasterGuard Hub System.
Find a Propeller for your Engine:
If you don’t see your engine below, you can use our prop finder to locate the propeller for your application.
To find your prop, simply choose your engine below and choose your pitch. If you have any questions, call us toll-free at 1-800-718-1233.
Click here to buy a hub only or, click here to buy a prop housing only (hub not included).
40hp (1995-98) / 50hp (1995-98) / 70hp (1991-95) / 75hp (1996-98)
75hp (1999) / 90hp to 150hp (1995 & newer)
Alpha One & Bravo One stern drives (May require high performance trim tab 76214A5 or anodic plate)
25hp to 50hp 4 stroke / 30hp / 35hp / 40hp (1977 and newer) / 45hp/ 50hp (1977 & newer) / 55hp / 60hp (1977 & newer) / 70 hp (1983 & older 3 1/2" gearcase)
70hp (1987-89 4 1/4" gearcase) / 75hp / 90hp / 100hp / 115hp / 125hp / 140hp
40 to 60hp Bigfoot (2 & 4 stroke)
XR4 , XR6 , Mariner Magnum I, II, III (thru 1993)
40C / 40D / 50D / 50C / 60A / 70A2 / 60B / 70B
2 cyl: 40hp / 48hp / 50hp (1975 & newer) / 55hp (1976-79) / 65hp
3 cyl (3 1/2" gearcase) / 75hp (1975-85) / Sprint & Formula E
2cyl (4 1/4" gearcase): 50hp / 45 to 55 commercial
3 cyl: 55hp / 60hp / 65hp / 70hp / 75hp (4 1/4" gearcase) / 65hp commercial
4 cyl: 75hp / 85hp / 88hp / 90hp / 100hp / 110hp / 115hp / 120hp (1986-94) / 125hp / 135hp /140hp (1977-84, 86-94)
4 cyl (V6 4 3/4" gearcase): 100hp commercial / 120hp (1985) / 130 hp (1995-96) / 140hp (1985)
OMC SX Cobra (1994 & newer) (19 spline prop shaft.)
OMC Cobra 800 & King Cobra stern drives. (15 spline prop shaft)
DT35C / DT40 / DT50 / DT50M / DT55 / DT60 / DT65 / DF40 / DF50
DT75 to DT140 / DF60 / DF70
DT150 to DT225 (includes EFI & BASS)
3.0 to 8.2L (19 spline prop shaft 1994 and newer)
(Not available for Volvo DuoProp or Aquamatic drives)
40hp / C40hp / F40 / E48 / C50 / F50 / 55hp / 60 (1976-91) / F60 (13 spline)
T50 High Thrust / C60 / P60 / E60 / 70hp / P75 / E75 / C75 / F80 / 85hp / 90hp / C90 / F100 / 115hp / F115 / C115 / 130 (15 spline)
150 to 250hp outboards / stern drives 3.0 - 7.4L
Call us toll-free is you have any questions! 1-800-718-1233